Your cart1

Sasha 2.0 - Olive Green

S/M

€136,95
Unit price
per 
Mand i petroleumsblå REDGREEN sweatshirt med halv lynlås

How to wash a printed sweatshirt — so the print lasts

A print that has begun to crack or fade is rarely a sign of poor printing. It is almost always washing and drying that has done the damage. Here is what actually wears down a print, and what you can change.

What wears down a print

Most prints on sweatshirts sit on top of the fabric rather than in it. They are broken down by three things: heat, which softens the print so that it loses its bond to the fibers; friction, when the print rubs against the rest of the wash; and chemicals, especially strong detergents and anything containing bleach.

This means that the damage happens in the machine and in the dryer — not while the sweater is being worn. A sweatshirt that is washed properly can retain its print much longer than most people expect.

Six things that determine how long the print lasts

  • Turn the sweater inside out. The single most important rule. Then the inside takes the friction in the drum, and the print does not touch zippers or buttons from the rest of the wash.
  • Wash cold or lukewarm. 30 °C is plenty for a sweatshirt that is not decidedly dirty. Heat is the print's biggest enemy.
  • Choose a gentle cycle with low spin. High speed presses and pulls at the print while the fabric is wet and most pliable.
  • Use a mild, liquid detergent. Powder often contains bleaching agents, and the granules can be abrasive. If you skip fabric softener, the cotton also retains its absorbency better.
  • Do not tumble dry. The dryer combines heat and friction — precisely the two things the print cannot tolerate. Hang the sweater up, or lay it flat.
  • Never iron directly on the print. If the sweater needs to be ironed, do it inside out or place a piece of fabric in between.

How often should it actually be washed?

More often than a wool sweater, less often than a t-shirt. A sweatshirt is typically used as a mid-layer and therefore has less direct skin contact. The collar and cuffs get dirty first, and they can be spot-cleaned.

Air the sweater out for a day between uses instead of washing it. Every wash takes a little toll on both the print and the fabric — fewer washes are the cheapest way to make a sweatshirt last longer.

Sweatshirts without prints

If the sweatshirt does not have a print, there is less to take into account, and then it is the material that determines. A pure cotton model like Floyd can handle 40 °C, while blends with polyester are typically washed at 30 °C — it is stated on the product page and in the label.

The ribbed edges at the neck, cuffs, and hem are what lose their shape first. They are stretched by hanging wet and by being pulled. Therefore, lay the sweatshirt flat to dry if it is heavy, and avoid pulling it off by the cuffs.

When the print still begins to crack

Slightly cracked print cannot be repaired, but it can be slowed down. Switch to hand washing or a gentle cycle, completely drop the dryer, and avoid ironing near it. A print that has gotten a couple of cracks often lasts a long time longer if it is not exposed to more heat.

And then there is the part that is not about washing: a print that sits on the front is also worn down by backpack straps and seat belts. It is worth knowing before choosing a sweater with a print like the one you use for commuting — a model like Frankie Logo fares better as a leisure sweater than as a daily work sweater under a bag.

If you want to know more about what the individual materials can do, we have compiled it in our guide to choosing materials. And material composition, washing instructions, and style no. are on each individual product page in the selection of sweatshirts for men.

Previous post
Next post